COMMUNICATION EQUIPMENT
Securatech Antenna manufactures Ground Plane and marine GP antenna. Our antenna design reflects innovative ideas and modern antenna fabrication.
Ground Plane Antennas are available with Unity or 3 dB and 6 dB gain. Various models of GP Antennas having Wider Band-Widths than specified can be designed and supplied.
Ground Plane and marine band GP Antenna have been constructed in high quality Aluminum or Brass material and polish / coating is applied to prevent corrosion. The Ground Plane Antenna packed with specially made GP antenna mounting hardware. All models are mounted at the roof height approx. 25 feet above the ground to provide the maximum communication range and perfect Omni directional coverage. Our antennas are designed and manufactured to provide the best gain figure, for the requirements of the band and for any specific application where the antenna will be used.
Securatech Antenna uses the very latest design and manufacturing technology methods to manufacture GP antenna, having following features:
• Innovative design for unique quality of omni-directional GP antenna (GPA).
• High gain and omni directional pattern of ground plane antenna.
• Low VSWR for the whole operating frequency band of gp antenna.
• High performance in worst environmental conditions due to its anti-corrosive aluminum alloy body.
• Light weight aluminum alloy is used to manufacture omni directional ground plane antenna.
Features:
Smart Electronics Communication manufactures GP antenna for VHF, UHF and microwave frequency band from 66 to 1250 MHz.
These GP antennas are designed to operate as per required frequency bands i.e. lower VHF, VHF, UHF or microwave band. The STSGP0DB ground plane antennas are made up of high quality material for long lasting use in analogue and digital communication systems. The mounting arrangement of ground plane antenna permits easy installation.
Fabrication:
Radiating elements and the body is made of high quality brass / aluminum alloy. The ground plane antenna operates at D.C. ground with low resistance discharge path for protection against lightning and immunity to noise. All the screws, nuts and bolts of ground plane antenna are of stainless steel.
Specifications:
| Model: STSGP0DB | ||
|---|---|---|
| Electrical Specification | ||
| Frequency Band | 118-135 MHz | |
| Bandwidth | 10 MHz | |
| Gain | 0 dBd | |
| Polarization | Vertical | |
| Radiation pattern | Omni-Directional | |
| Horizontal Beam-width | 360° | |
| VSWR | ≤1.5:1 | |
| Impedance | 50 ohm | |
| Maximum Input Power | 100 watt | |
| Lightning Protection | Direct Ground | |
| Mechanical Specification | ||
| Material | Aluminum / Brass | |
| Mounting Hardware | Stainless Steel | |
| Weight | 1.5 Kg (3.3 lb) | |
| Wind Rating | 200 Km/Hr | |
| Mounting Pipe Diameter | 32-51 mm | |
| Connector | UHF / N-female | |
| Environmental Specification | ||
| Operating Temperature | -30° C to 70° C | |
| Humidity | 0 to 95% RH | |
Feature:
1. D-shaped headphone PTT (key call), built-in line microphone, suitable for Motorola XiR P8668 P8268 APX 7000 XPR 6500 XPR 6550 radio safety door monitor.
2. Clamp this hands-free headset on your shirt and start using your radio equipment for discrete and easy communication.
3. Earplugs can be easily fitted to your ears to keep your conversation private.
4. Provide excellent durability, reliability and performance in a low-profile environment.
5. Applicable to army, nightclubs, bars, paintball, safety, restaurants, hotels, bodyguards, warehouses and noisy environment.
Specification:
Colour: Black
Packaging size: 180*120*25mm/7.08*4.72*0.98''
Application: for Motorola XiR P8668 P8268 APX 7000 XPR 6500 XPR 6550
This Swivel Belt Clip replacement for 2-Way Radios is designed to replace your broken or worn-out belt clip. A spare clip reduces your walkie talkie's downtime due to damaged belt clips. This belt clip allows you to keep your KENWOOD radios ready to be used at all times. Don't get caught without a spare replacement belt clip for your KENWOOD two-way radios. This belt clip holds your two-way radio while being worn on your waist. Simply squeeze the top and bottom of the clip to attach it to the back of your two-way radio. Compatible with the KENWOOD TK-2317 radio
Our KENWOOD products meet stringent quality standards and is designed to provide years of reliable service. This belt clip is manufactured with high quality components in a state-of-the-art certified manufacturing facility for the finest quality radio cases. Each item is tested throughout the manufacturing process to be free of defects for form, fit and workmanship. We also provide unsurpassed country wide support and an industry leading 1-year warranty.
Belt Clip for Kenwood TK-2302T TK-2306M TK-2306NM TK-2307M TK-2312E TK-2317M TK-2317M2
- Easily mounted onto the back of all your batteries:
- Guaranteed to meet or exceed the original equipment manufacturers specifications.
Technical Specifications
Weight : 20gms
Type : Fixed
Belt : 3 inch
- 1