Hi-Tech Gadgets

Tools Description

Doctors Stethoscope.
 BP Handle 6” + 1” with BP Blade set
 Scissors 6”, 7”, 8” + 1”
 Dental Mirrors 6” + 1”, 10” + 1”.
 Scalpel 8” + 1”
 Artery Forceps 6”, 7”, 8”, 9” + 1”
 Torch with two pencil cells
 Torch medium with two cells
 Hammer sledge and ball pane (2 Kg + 10%) with claw hammer.
 Pipe wrench 10” + 1”
 Hand vice Grip 6” + 1”
 Magnifying Glass
 Nipper cutter
 Tin cutter
 Nose Plier
 Knife 80 mm Blade
 C Clamp 4” + 1”
 Spanner Adjustable 15 mm + 5 mm
= Spanner Adjustable 30 mm + 5 mm
 Hack Saw 7” + 1” with blade set.
 Hand drill with drill bit set.
 Spanner 10 piece metric set.
 Spanner 10 piece imperial set.
 Soldering iron 6” with soldering paste & solder wire 50 gms
 Sponge holder 10” + 1”
 Can opener 6” + 1”
 Tape cello
 Tape black
 Tape paper
 Punch 5” + 1”
 Cold chisel 6” + 1”
 Cold chisel 8” + 1”
 Screw driver set (watch maker)
 Screw driver alignment
 Super glue adhesive
 Thermal Cutter

 Screw Driver set consisting of :
o Flat 2 mm + 1 mm blade width
o Flat 4 mm + 1 mm blade width
o Flat 6 mm + 1mm blade width
o Flat 8 mm + 1mm blade width
o Flat 10 mm + 1 mm blade width
o Flat offset 6 mm + 1 mm blade width
o Flat offset 7mm + 1 mm blade width
o Flat offset 10mm + 1 mm blade width
o Cross point 75mm + 10mm
o Cross point 150mm + 10mm
o Cross point 200mm + 10mm
o Cross point 250mm + 10mm
 Pliers cutter with grip long point nose
 Pliers cutter/grip combination
 Pliers flat jaw
 Pliers round jaw
 Cutter side 160mm + 10mm
 Cutter side 120mm + 10mm
 Fish line with hook
 Tweezers
 Probe (straight & angular)
 Wire brush
 Swiss Army Knife
 Tape measuring 4mtr + 1mtr
 Non metallic probe
 Hand gloves
 Fire extinguisher 600 gm + 100gm.
 Bar lever spike & cranked chisel ends 445 mm + 10 mm
 Bar lever cranked form & wedge ends 260 mm + 10 mm
 Square driver socket set
 Pick 560 mm + 10 mm head
 Pry bar
 Shovel round nose
 Folding ladder (optional - subject to requirement of the user)
o Length 12 feet, Width 1 foot.
o Width 1 foot.
o Weight – maximum 15 kgs
o Capacity – 85 Kgs + 10 kgs.
 Miscellaneous: Cleaning kit, User Hand Book.

Note:
1. Specifications may change as per customer requirements
2. Images Shown are for indicative purpose only, Actual product may differ

Searchlights are lightweight, compact, high intensity illuminators that use a field replaceable Halogen short arc lamp and a precision electroformed reflector to provide the ultimate source for long range and wide angle portable illumination.

Technical Specifications

Light Source: 12v/55w Halogen bulb to provide smooth and intense pre-focused light of approx 140 lumens.
 Focus Beam: 1000 Mtrs.
 Battery: 12v 7Ah Rechargeable lead acid SMF Exide Battery with inbuilt battery charger.
 Run Time: 90 minutes
 Dimensions:
 Length 260 mm
 Front diameter 160mm
 Rear diameter 135mm
 Weight Approx 3.7 kg
 Casing/Body: One piece moulding with integral handle made of super tough glass fitted poly-carbonate material minimum thickness of 2.5mm front & back cover with tool less removal.
 Shoulder Strap: 135cm long 3cm wide rubber flap sifted inside the nylon strip.

Operating Temperature: -20° C to +55° C, RH up to 90% none condensing.
 Circuit Description:  Push to ON/OFF switch & membrane switch.
 Low battery indication with audio.
 Dimmer & Auto flashing with membrane switch.
 Timer, flasher & continues mode select membrane switch
 DC Blown Fuse indicator
 DC Fuse is placed outside

 Charging status indicator:
 Bust Mode – Red
 Tickle Mode – Yellow
 Full Charged – Green blinking

 Additional Features:
 Single Panel Indication.
 Completely Waterproof / All weather proof.
 Light weight
 Easy operation

 Certifications:  CE and ISO Certified.

Note: Searchlights are lightweight, compact, high intensity illuminators that use a field replaceable Halogen short arc lamp and a precision electroformed reflector to provide the ultimate source for long range and wide angle portable illumination.

Technical Specifications

Light Source: 12v/55w Halogen bulb to provide smooth and intense pre-focused light of approx 140 lumens.
 Focus Beam: 1000 Mtrs.
 Battery: 12v 7Ah Rechargeable lead acid SMF Exide Battery with inbuilt battery charger.
 Run Time: 90 minutes
 Dimensions:
 Length 260 mm
 Front diameter 160mm
 Rear diameter 135mm
 Weight Approx 3.7 kg
 Casing/Body: One piece moulding with integral handle made of super tough glass fitted poly-carbonate material minimum thickness of 2.5mm front & back cover with tool less removal.
 Shoulder Strap: 135cm long 3cm wide rubber flap sifted inside the nylon strip.

Operating Temperature: -20° C to +55° C, RH up to 90% none condensing.
 Circuit Description:  Push to ON/OFF switch & membrane switch.
 Low battery indication with audio.
 Dimmer & Auto flashing with membrane switch.
 Timer, flasher & continues mode select membrane switch
 DC Blown Fuse indicator
 DC Fuse is placed outside

 Charging status indicator:
 Bust Mode – Red
 Tickle Mode – Yellow
 Full Charged – Green blinking

 Additional Features:
 Single Panel Indication.
 Completely Waterproof / All weather proof.
 Light weight
 Easy operation

 Certifications:  CE and ISO Certified.

Note: 1. Specifications may change as per customer requirement
         2. Images Shown are for indicative purpose only, Actual product may differ.

If your premises are worth securing, it’s worth looking into under vehicle Surveillance Systems.
 Our UVSS solutions are designed to scan, monitor, and digitally record crisp, clear video images of the entire width of a vehicle’s undersides all with one permanent or portable system.
 It’s an ideal solution for governmental, military, corporate, and transportation facilities wherever complete vehicle monitoring is required.
 The flexibility of the UVSS allows it to be configured to meet your security inspection the UVSS can be as simple as a camera connected directly to monitors for monitoring and PC-based recording/monitoring can be combined, which also makes it easy to network the security system.


Features:
 Designed for rugged terrain, harsh environment, temperature 
 Waterproof camera and lights
 ANPR (Automatic License Plate Recognition) and image camera compatible
 Open architectures for easy integration with CCTV system
 Video can be transmitted on IP, wireless, fibre or standard coaxial Cables
 Standard systems come with flat panel LCD display Above-surface
 Camera/lighting mounting: no major construction required
 High-resolution long-life colour vision system
 LED’s provide bright white, high intensity light, providing daytime
 simulation light for undercarriage illumination
 LED’s are rated for 100,000 operating hours
 Easy, hose-down cleaning of camera and LED’s
 All cabling and power accessories are standard with all systems
 Permanent or portable solution
 All steel ramp with 40-ton capacity for heavy-duty performance Scans vehicles of all length and breadth
 Scans underside of moving vehicles (up to a speed of 30 Kmph) and  Produces a high quality image, in real-time.
Benefits:
 Efficient viewing is possible
 Facilitates detection of explosives, bombs, contraband objects.
 Facilitates peak-hour inspection without stopping any vehicles.
 Very high through-put saves time while maintaining high standards.
 Highly detailed viewing is possible in case of suspicion.
 Is a crucial time & life saver.
 Easier to navigate. Ensure better usage of the systems.
 Multi level and Multi location monitoring and reporting is possible.
 Ease of abnormality detection due to a reference point.
 Crucial aid in post event analysis
 Provides one stop solution for all security needs
 An idea & convenient security aid for crucial & large events such as high profile exhibitions and rallies.

Technical Specifications

Main Camera
Sensor Type : Area Scan
Resolution : 1294 pixels x 964 pixels
Video Format : Gige
Dimension : 42 mm (W) x 29mm (H) x 29mm (L)
Power Supply : 12V to 24V

License Plate Camera
Sensor Type : Stainless steel casing with weather proof casing
Resolution : 1.8 mtrs x 1 Mtrs
Maximum Scan Speed : 30 Kms/hour

Mechanical
Material : Stainless steel casing with weather proof casing
Dimension : 1.8 mtrs x 1 Mt
Maximum Scan Speed : 20 Kms/hour

Processing Unit
Processor : Intel Xeon i7
RAM : 16 GB DDR
Hard Drive : 1 TB
Graphic Card : 2 GB NVIDIA
PCI slots : 3 PCI slots
Monitor :” LCD / LED
Connectivity : 1Gi ga LAN

Sensor Type
Type : Induction Loop Sensor
Power : 12 VDC
Output : 1 TB
Lightening Unit
Halogens/CFl/LED : 12V

Note: 
1. Specifications may change as per customer requirement
2. Images Shown are for indicative purpose only, Actual product may differ.