BOMB DETECTION & DISPOSAL

Technical Specifications : 

Blast Carrying Capacity:

The Bomb Blanket offer protection against blast and fragments (V50@not less than 450m/s)

Additional Blast Capacity:

It is able to contain a blast of min 100 gms of high explosive.

Construction:

The Bomb Blanket is made with multiple layers of treated KEVLAR, ballistic fabric and confirm to the protection level required and then sewn into a fire retardant,water repellent nylon cover.

Holding Arrangemnt :

The bomb blanket consists of a nylon web loop near the 4 corners and a safety circle.

Size :

Size of bomb blanket 1.5 m x 1.5m.

Weight:

Maximum weight of bomb Blanket is 18Kgs.

Miscellaneous:

a) Cleaning Kit 
b) User' hand book and technical manual giving full description of the item.
c) Literature on preservation technique as applicable.

Note: 1. Specifications may change as per customer requirement
          2. Images Shown are for indicative purpose only, Actual product may differ.

The Bomb Basket is designed to protect property and personnel from the blast and fragmentation occurring when an IED is set off. The basket is manufactured from a heavy duty ballistic fibreglass tube enclosure with a gel coat finish.

• Size:
• Height : 36",
• Diameter : 24"

• Protection:
• Successfully Contains Blast Of 200 gms Of TNT/ RDX Or Equivalent Explosive & One Detonator.

• Material:Composite Ballistic Material.
• Convenience:Nylon Holding Net to Hold IED’s / IOD’s.

• Weight:50 Kg. (Approx).

       Colour:Red / Orange / as per customer requirement. 

• The removable inner bag is made from a fire retardant nylon net with venting to keep it in place should a device be activated inside the bomb basket. 

• The inner net will hold the suspect device in place allowing x-ray inspection of the device inside the net. Datum Points are provided for X-Ray Imaging. 

• The net handle loops allow easy removal of the package for further inspection in a safe location. The outer unit is fitted with rubber rings to allow the bin to be rolled to a safe area without the need to remove the package and a detachable base plate provides protection to the floor when in the upright position.

         2. Images Shown are for indicative purpose only, Actual product may differ.

Features:
 High detection sensitivity.
 Capable to discriminate between two metals placed adjacent to each other.
 Automatic adoption to soil and water conditions.
 No effect of magnetized soil or of Sea water.
 Safe for electrically activated mines.
 Adjustable volume control.
 Selector switch for static or dynamic operation.
 Pinpointing the target within ± 3cm 

Additional Features:
 All weatherproof.
 Lightweight with complete operating weight of approx 3.5 Kg.
 Easy operation, no adjustment or compensation necessary.
 Technology: Pulse Induction Technology.
 Metal Detection: Ferrous, Non-ferrous, Ferrite & Alloys.
 Capable to detect Metal inside hollow PVC Pipe of 2 mm.
 Capable to detect Metal in mineralized soils from 2.5 feet depth.
 Capable to detect Metal on 1 cm cement plastering walls.
 Maximum Usable detection: 0.05 gm. Stainless steel at 75 mm.
 Battery / Power Supply:Inbuilt rechargeable battery with low battery indicator.
 Carrying Case: Light weight safety carrier / container for safe transportation.
 Warranty:2 years against manufacturing defect.

Searchlights are lightweight, compact, high intensity illuminators that use a field replaceable Halogen short arc lamp and a precision electroformed reflector to provide the ultimate source for long range and wide angle portable illumination.

Technical Specifications

Light Source: 12v/55w Halogen bulb to provide smooth and intense pre-focused light of approx 140 lumens.
 Focus Beam: 1000 Mtrs.
 Battery: 12v 7Ah Rechargeable lead acid SMF Exide Battery with inbuilt battery charger.
 Run Time: 90 minutes
 Dimensions:
 Length 260 mm
 Front diameter 160mm
 Rear diameter 135mm
 Weight Approx 3.7 kg
 Casing/Body: One piece moulding with integral handle made of super tough glass fitted poly-carbonate material minimum thickness of 2.5mm front & back cover with tool less removal.
 Shoulder Strap: 135cm long 3cm wide rubber flap sifted inside the nylon strip.

Operating Temperature: -20° C to +55° C, RH up to 90% none condensing.
 Circuit Description:  Push to ON/OFF switch & membrane switch.
 Low battery indication with audio.
 Dimmer & Auto flashing with membrane switch.
 Timer, flasher & continues mode select membrane switch
 DC Blown Fuse indicator
 DC Fuse is placed outside

 Charging status indicator:
 Bust Mode – Red
 Tickle Mode – Yellow
 Full Charged – Green blinking

 Additional Features:
 Single Panel Indication.
 Completely Waterproof / All weather proof.
 Light weight
 Easy operation

 Certifications:  CE and ISO Certified.

Features:-

• A ring-shaped shackle for the wrist, which is one of a pair connected by short chain.
• Rotating arm backloads for speed cuffing.
• Double Locking Mechanism.
• Material used to make the handcuffs i.e. nickel coated metallic with nickel finishing.
• Prevents the ratchet from advancing further in the closing direction.
• A mechanism which locks a handcuff pawl in an engaged position.
• Weight: 270 gms
• Dimensions: Each handcuff of each pair to have minimum opening of 55 mm for insertion of the human wrist. The inside perimeter of the handcuff to be a minimum 200 mm when the ratchet is engaged at the rist notch entering the locking mechanism. The inside perimeter of the handcuff to be a maximum of 165 mm when the ratchet is engaged at the last notch entering the locking mechanism. The maximum overall length of the pair of handcuffs to be 2200 mm.
• Show no substantial corrosion and to continue to function.
• Warranty: 3 years
• Finish: Bright Nickel Finish
• Two standard keys with every handcuff.

Note: 1. Specifications may change as per customer requirement
         2. Images Shown are for indicative purpose only, Actual product may differ.